Training Classroom

The DMIS / I++ DME Workshop uses an innovative approach to demonstrating how DMIS works with I++DME and other commercial software to achieve an integrated framework.  The Workshop will still focus on the programming and implementation of the Dimensional Measuring Interface Standard (DMIS) with an introduction to the I++DME specification.  However, other DMIS-based software products will also be running to provide examples and comparisons. 

This DMIS Workshop is scheduled for the Brighton, Michigan facility of Metris (Nikon)– USA The hands-on Workshop is designed for CMM Technicians, Metrology Specialists, and Quality Engineers who need to better understand measurement programming, and the role of standards in the interoperability and ever-changing world of dimensional metrology. 

The Workshop will begin 1:00 PM Monday, and conclude at noon Thursday (24 class hours), and will include, but not be limited to, the following topics. 

 To view the Workshop Course Outline, click here.

Individual Instruction

We now suggest the option of bringing your own laptop with your own company software.  This allows you to see how the code works with YOUR company's software.  Following the structure of our last several workshops, we will have several DMIS-based software products running.  We will also offer the UCC-Server software, and class participants can load it and watch CAMIO (or their own I++ compatible software) actually run DMIS, and see the I++DME happening at the same time.  That is, when you run DMIS, it is converted to I++ control commands before the controller sees it. With this setup, one can observe the background I++ that occurs based on the currently running DMIS program. It is also possible to view “side-by-side” comparisons of the DMIS to the background I++. 

Class sessions will be held at the Metris (Nikon)-USA facility, located at 12701 Grand River Road, Brighton, Michigan.

The class sessions are scheduled as follows:
Monday, February 15, 2010:  1:00 PM- 5:00 PM 
Tuesday, February 16, 8:00 AM – 5:00 PM (Lunch provided)
Wednesday, February 17, 8:00 AM – 5:00 PM (Lunch provided)
Thursday, February 18, 8:00 AM – 12:00 Noon
 
HOTEL INFORMATION: To view a list of hotels and restaurants convenient to the Metris-USA facility in the Brighton area, click here.  To view a map of northern Michigan with driving directions to Metris LK, click here.   

The Registration Fee for the DMIS / I++DME Training Workshop is $1,395 per person.  Registrations for groups of two or more from the same company qualify for discounts.  The registration fees include all Workshop sessions, luncheons and refreshment breaks during the Workshop, a complimentary CD of the DMIS  Standard (regular price $265).  [If you would also like a paper hardcopy of the DMIS Standard to use during your class work, we must order it to be printed at least two weeks before the class starts.  Please add $170 to your registration fee (half-price of normal hardcopy), and indicate in the “Comments” box on the registration form that you wish to order a hardcopy of the standard.]  Hotel accommodations and other meals are not included in the registration fees.  Please click “Contact Us,” to send an e-mail if you have any questions. 

To register for this Workshop, click the following link for secure online Registration.  [The current Training Workshops are designed for "Beginner-to-Intermediate" programmers.  We are planning to establish an "Intermediate-to-Advanced" Workshop depending upon the level of interest.  If you or your colleagues have an interest in an Advanced Workshop (including multi-axis -- Revo) training, please state your opinion in the "comments box" on the Registration form page.  We would value your input whether or not you are registering for this particular class!]  

The registration fee may also be paid by check sent to the address below.  Please allow time for postal mail to arrive before the cut-off date:  Remit to:

Cancellation Policy: You should register in advance (now) for this class to assure your reservation.  All registration fees must be paid before the cut-off date of Wednesday, February 10.  Full refunds will be issued, less a $150 cancellation fee, if written cancellation requests are received prior to the cut-off date.   

Remember to register as early as possible. Because of the equipment and facilities required for this Workshop, seating is limited. We need to know the number of attendees well in advance in order that Metris (Nikon) --USA can prepare for the expected group size. This is especially true for handouts and other materials provided, computer access, refreshments, and lunches.

This is your opportunity to learn the DMIS Standard (which is the most widely used inspection standard in the world) as well as to understand the new I++DME specification with "hands-on" experience. 

~~~~~~~~~ What previous Workshop participants say ~~~~~~~

Class Evaluation sheet comments – average of last 4 years:
Value to you professionally and to your company? 9.6 out of a possible 10.
Presentation format plan, method, and materials? 9.4 out of a possible 10.

Personal evaluations:

"My company uses [another software package] for inspection, but it is based on DMIS.  Now that I know how to program in DMIS, my job will be a lot easier."
“I understand now how DMIS and I++DME work together.”
“I now have the ability to recognize the code and understand what it is doing and why.”
“The training is great, and the training facilities are excellent.”
“Understanding the DMIS language and its applications will be a great help on my job.”
“The workshop was great – wish it were longer so I could learn more.”
“The instructor allows us to use our own company software – which is a great advantage!”